en | fr | de | it | es | pt | ru
blog.niot.net
One more for the road: Reiter Engineering builds Gallardo GT3 for the street

Turning road cars into race cars and then back into road cars seems to be Reiter Engineering's new specialty. The factory-supported Lamborghini race team, which also recently built a street-legal variant of their Murcielago R-GT that competes in the FIA GT1 and European Le Mans Series, is now offering a road version of their Gallardo GT3 racecar. Based off the standard Gallardo with the 5.0L V10, the "Strada" features carbon fiber bodywork including fenders that have been widened 60mm, a new front fascia with "shark" style air ducts, side skirts and a large carbon fiber wing at the rear. A single large center-mounted exhaust system reduces weight by nine kg and added an extra ten horsepower, while new three-piece alloy wheels are wrapped with ultra sticky Michelin Pilot Sport 2 rubber. The interior stays relatively stock, although the stock seats have been replaced with leather-covered racing units. While we wouldn't say the result is subtle, it's definitely one of the cleaner designs we've seen.
posted : 12/30/2008 @7:21:56 PM
Reiter Engineering offers street legal version of Murcielago R-GT racecar

The benefits of motorsports usually have a way of trickling down to road cars, although in this particular case the connection is fairly direct. Reiter Engineering, the factory-backed motorsports company that competes in the FIA GT1 and GT3, recently unveiled a street legal version of its Murcielago R-GT racecar at the Essen Motor Show. The supercar features race-oriented modifications including a carbon fiber front spoiler and rear wing, OZ Racing wheels, and upgraded brakes and suspension components. Reiter also added a new rear fascia, and moved the exhaust system up towards the rear deck lid. Apparently the show car is a one-off, although word has it that it can be had for the right amount of money, and the individual components on the car are also available for purchase.
posted : 12/22/2008 @9:23:01 PM
1995 Ferrari motorcycle to be auctioned

Ferrari doesn't make motorcycles. At least, not officially... but that fact hasn't stopped a number of custom cycle makers from taking matters into their own hands. Perhaps the most famous Maranello-inspired two-wheeler was made by Arlen Ness, but that one's not all that practical in conception. We would imagine a Ferrari motorcycle to be a truly sporting machine, equally as comfortable on the race track as the street, or, more realistically, being shown off in one's garage. Ferrari seems to agree, as the only cycle ever created that bears an official Ferrari chassis number -- SF-01M -- has true sporting pretensions. Built by David Kay Engineering and completed in 1995, this one-and-only Ferrari motorcycle sports a DOHC engine displacing 900cc and putting out 105 horsepower at 8,800rpm. The only styling choice we take exception with are the Testarossa-style strakes on either side, but nothing's perfect, right? So, what's the only officially official Ferrari bike worth? We'll find out for sure when the auction ends on the 20th, but the expected price is between 325,000-375,000 Swiss francs, or around $300K in U.S. dollars.
posted : 12/21/2008 @12:37:22 AM

General Motors dedicates new powertrain engineering center

General Motors dedicated its new Powertrain Engineering Development Center in Pontiac, MI on Friday. On hand were CEO Rick Wagoner, Powertrain EVP Tom Stephens and the usual array of elected officials trumpeting their involvement in making the new facility happen. Prior to the speech making and pushing of the ceremonial start-up button, we got a tour of the new 450,000 square foot facility that GM proclaims as the largest, most advanced powertrain development center in the world.

VP of powertrain engineering Dan Hancock explained that the center will be responsible for developing the systems that comprise GM's advanced propulsion strategy. GM is consolidating powertrain development operations from four facilities in Southeast Michigan at this new Pontiac location. When the 1,200 relocating staff have moved in there will be 4,300 staff on site. GM is using new systems being implemented to move forward with its Road to Lab to Math (RLM) strategy that will help reduce engineering development costs. The center will lead development of all manner of future GM powertrains from new gas and diesel engines to hybrid systems and the E-Flex system that will power the Volt. Read on to learn about some of the new systems GM is putting in place to help improve its powertrains.

posted : 8/7/2008 @9:12:55 PM

One MPG is not enough: Automakers desperate to make a gallon go further

If anyone were to come along and do an updated version of Dire Straits' "Money for Nothing," the could change the background vocal from "I want my MTV" to "I want my MPG" or "I want my low Cd." Coefficient of drag, that is. Carmakers are taking every step they can, starting with aerodynamics, to give cars better gas mileage right now while they wait for more substantial technologies to come online in the near future.

But the tweaks don't stop with aero finessing. The 2009 Dodge Ram spent 200 hours in the wind tunnel, and it also received tweaks to its ECU, which means it spends more time in its cylinder cutoff mode. That, plus eighty pounds of weight savings, adds up to one more MPG on the EPA sheet. Said Ford's Derek Kuzak, "We need to treat every joule of energy in a vehicle like a precious commodity."

In fact, that song hook could also be "I want my XFE." The Cobalt XFE, developed over 18 months to offer the best gas mileage in the Cobalt line, is selling six percent better than expected. Fuel economy, instead of design, is the number one reason people buy a Cobalt now. And the XFE has the lowest on-the-lot time of any Cobalt model. That's how important the price of gas has become.

posted : 8/7/2008 @5:14:38 PM
Sigh. Pontiac G3 may be headed for U.S.

Looks like badge engineering is alive and well at General Motors. After decades of the practice damaging its brands, GM may sell the Pontiac G3 in the U.S. The G3 is nothing more than a rebadged version of what we know as the Chevy Aveo that's sold in Canada as the Wave. It's rebadged and sold elsewhere in the world under various brands, but we don't see those here in the U.S. The new subcompact would supposedly bolster the offerings at combined Pontiac-Buick-GMC dealers by adding a new fuel-efficient vehicle to the mix. Oddly enough, however, the G3 only achieves marginally better fuel economy than the already-available Pontiac Vibe, itself a slightly redesigned version of the Toyota Matrix, thanks to its diminutive four-banger and old-school four speed automatic tranny. Curiously enough, you can already EPA numbers for the G3 sedan and hatchback at the government's fuel economy website, which could be further support for the notion that it will be sold in the U.S. soon, or may indicate that it's sold in a U.S. territory like Puerto Rico.
posted : 6/4/2008 @2:19:38 PM

Grand Prix: Renault F1 opens internship program

If you're a recently graduated or soon to graduate student in a technical or scientific field, listen up, because this could very well be the internship that could jump-start your career. Every year for the past five, the Renault F1 team has picked the top entry in a contest for a six-month internship. The competition is run by the Altran Engineering Academy, the technological manpower agency that consults for the team. Entries are accepted in eight F1-related fields based on 500-word summaries of innovative ideas that could help the Renault cars beat the competition.

The winner is chosen from among nine finalists who present their proposals this summer to a jury chaired by the Renault F1 team's head of R&D at its headquarters in Enstone, England. Applications are due by May 15, and having observed the results of last year's selection, the competition is fierce, so if you want a shot at working with the best, better get crackin'.
more ...

posted : 3/26/2008 @6:41:49 AM

Nissan using special suit to simulate elderly drivers

Much like the automotive crash test industry utilizes "dummies" of different statures and body weights to simulate different passenger types, Nissan engineers have developed a special suit to "simulate" the elderly. Nissan went to all this trouble because it anticipates that Baby Boomers will soon command a larger share of automotive sales. It's a preemptive plan to design vehicles that accommodate their needs. Well, some of them, as we don't expect in-dash prune juice dispensers anytime soon.

This innovative suit is comprised of several different components that are each designed to restrict physical movement or reduce vision (interestingly enough, donning the suit does not make the wearer crave early bird specials or migrate to Palm Springs). Dark colored glasses simulate the poor vision and gloves simulate reduced dexterity. Casts on on the body also weigh down the wearer's limbs to simulate arthritic pain. Our favorite is the big thick waist belt designed to simulate the "middle aged spread."

posted : 2/26/2008 @6:40:08 PM
Lotus annouces new Hybrid and Electric Vehicle Group

Behind the scenes, Lotus is much more than a low-volume manufacturer of sporty little roadsters. Along with Lotus Cars, Group Lotus houses Lotus Engineering. With decades of motorsports experience, Lotus Engineering offers consulting expertise to automotive suppliers and OEM manufacturers. They've even made their mark in the intense world of cycling. More recently, their close work with Tesla as the supplier of the Roadster's chassis must have had some influence on the next direction of the firm, as they have now announced the creation of a new Hybrid and Electric Vehicle Group. Lotus hopes the move will further expand its consulting reach.

The newly-anointed Hybrid and Electric Vehicle Group is already busy with project Low CO2. The initiative is a collaborative effort with automotive supplier Continental. The engineers have reduced the CO2 emissions of the already low-emitting 1.5L gasoline-powered Opel Astra by 15 percent while also bumping up its power output. Their achievements are accomplished through improved exhaust manifold design, injector placement, altered valve lift and timing, increased fuel pressure and the implementation of a mild hybrid drive.
posted : 2/24/2008 @3:44:44 PM
Audi Super Bowl ad puts Old Luxury on notice

Audi has posted a sneak preview of its Super Bowl spot. Fans of The Godfather will love it, and anyone even remotely aware of The Godfather's memorable scenes will get it. Whether it helps persuade luxury car buyers that the interlocking rings constitute an offer they can't refuse will be determined on future sales charts. If nothing else, however, we know that Audi certainly brought its "A" game to Super Bowl Sunday...and that Johnny Fontane will get that movie.

Watch the preview here
.
posted : 2/4/2008 @2:38:52 PM
< back ( 1 ) next >
:: new posts
:: popular posts
copyright 2007 (C) - powered by ceastudio