



There is no shortage in the automotive world of tuners endeavoring to squeeze extra performance out of already devastatingly fast cars. But Edo Competition is a breed apart. For those still unfamiliar, check out our previous posts on Edo's customized Lamborghini LP640, Ferrari 599 and Porsche Carrera GT, which demonstrate that, in Edo's blue eyes, perfection is relative and can always be improved upon. Their latest venture was to crank up the Ferrari Enzo, and have once again turned their attention to its sister supercar, the Maserati MC12.
This, of course, isn't the first time the German tuning house has taken their hammers to the uber-Trident, having cranked out the MC12 XX and cranked up the MC12 Corsa. A bit more subdued than its predecessors, the latest MC12 package aims to improve the super-exotic's power-to-weight ratio, which came as stock a bit lower than that of the Enzo due to more bodywork. Edo has managed to trim 220 lbs of extra weight from the Maserati, while increasing power by 70 cavalli to 700hp. Edo has also fitted a host of modified components from the variable exhaust and adjustable rear wing to the retuned suspension and new wheel package. Visual changes were kept to a minimum, but customers can always specify their own exterior and interior mods.

Edo Competition has no qualms about taking positively perfect exotic machinery and tweaking it to suit customer's tastes. And when it comes to the paragon of rolling automotive masterworks, the Ferrari Enzo is arguably King of the Hill.
While the Enzo isn't lacking in either the power or appearance department, that hasn't stopped Edo from making some subtle changes to the Enzo's exterior and powertrain. Edo began by replacing the intake with a revised ram-air system and a set of high-flow air filters, then worked its magic downstream with a set of headers similar to those in the FXX, along with a duo of high-flowing cats and a new exhaust system with remote-controlled, butterfly valves that allow the sound levels to be adjusted on the fly. All those bits are tuned through a modified ECU to produce 700 hp and 527 lb.-ft. of torque, which is sent through a heavy-duty clutch and on down to a retuned stock transmission that replicates the shift times of the FXX.
The Enzo's factory rolling stock has been replaced with 19x10-inch wheels in front and 20x13-inch wheels in the rear, wrapped in Michelin tires sized 265/35 R19 and 335/30 R20, respectively. The wheels can be custom painted to the customer's specs and a new suspension package, with adjustable compression and rebound, has been developed to mimic the setup found on the FIA GT MC12.
Edo claims that the sprint from 0 to 62 mph is estimated at 3.5 seconds and that the run from rest to 186 mph is dropped to 22 seconds flat. All the specs are available in the press release after the jump.

Say what you will about Edo and the things it does to supercars, but you've got to hand it to them: it takes a lot of nether-regional fortitude to try and improve on the most finely honed and intricately developed performance machines. The latest results of Edo's endeavors is the 630 Scuderia.
Although you wouldn't recognize it from the name, the 630 Scuderia is based on the Ferrari 599 GTB Fiorano. Using Edo's existing 630 GTB – whose engine more closely resembles the high-strung unit from the FXX than the "stock" 599's Enzo-derived powerplant – and upgrades it with a new aerodynamic kit designed to optimize the cooling and airflow around the vehicle. There's a sharply-styled front end with bigger vents that help cool the brakes, with an integrated lip spoiler increasing downforce. Underneath and around back, a new aerodynamic undertray and widened six-blade diffuser help optimize stability, aided by the new side skirts. All the components are made from carbon fiber, cutting curb weight down by 110 lbs.
Check out the images in the gallery below – and the press release after the jump – to make up your own mind: stylish and functional enhancement or sacrilegious defilement?
