ABC News recently did a segment on the Chevy Volt, calling it "the automotive equivalent of the moon shot." Most of it you've heard before -- GM's in trouble, if the Volt doesn't work then it means more doom, and "industry experts" don't believe the Volt will come out in time. But there was a glimpse of the production model of the car, including the interior.
One intriguing line was, "it will look a lot more like a typical 4-door than the show car concept." The front quarter view you get of the clay model is quite a bit altered from the concept, but still slick. The presenter also calls the interior reminiscent of Apple, but unless he means the fact that there's not a button in sight, it doesn't look much like an Apple. It's got a nice steering wheel, though.
Either way, we really hope GM pulls this one off. But frankly, no one knows if that will happen, and that includes, apparently, GM. So we have to wait until November 2010 to see if Lutz ("Yes!") or the Volt engineer ("We'll see...") is correct. Until then, get your bets in now, folks.
So let's talk renderings of what the production Chevrolet Volt might look like since they seem to be popping up a few places now. We know for a fact that it will look different from the concept that debuted in January 2007 at the Detroit Auto Show. Will it look like the image above or more like the one we showed you earlier today from another site? From what we know it will almost certainly be closer to this red car, although probably not exactly the same. As we learned last fall, the concept was not particularly aerodynamically efficient nor did it meet the requirements necessary to meet pedestrian safety standards. Since low drag is paramount in order to maximize the amount of kinetic energy recaptured during regenerative braking, the nose has to be much more rounded when viewed from above and the windshield needs more rake. The rendering above comes much closer on both counts and is also closer to what was seen on the wind tunnel model earlier this spring.
The Truth About Cars' contributor Andrei Avavarii is one of those rare individuals with a real knack for using Photoshop. Being a dedicated car guy, Avavarii's photochoppery is often a very good representation of what a real production automobile could look like. Such is the case with his latest piece, which offers an early glimpse into the design of GM's most highly anticipated vehicle before it's finally released to the public sometime in 2010 (hopefully).
The most radical design element kept in this speculative-image are the transparent sections built into the upper door skins first seen on the original concept. Lutz says that the production car will be recognizable as a Volt though some concessions will need to be made, so Avavarii has enlarged the greenhouse and streamlined the car a bit for the sake of aerodynamics. Of course, we'll just need to wait till Chevy lays down its cards -- possibly as early as this October in Paris -- before we know how accurate this rendering may be, but it's always fun to speculate in the meantime.
Testing of the Chevy Beat is officially underway, and our friends at NextAutos have procured the first set of spy shots. The camo'd mule is still sporting the short overhangs and upright silhouette of the concept, but GM decided to equip the squat city car with another set of doors to make ingress and egress easier for rear-seat passengers.
Initial reports suggest that power will be provided by a 1.2-liter 16-valve DOHC inline-four, mated to either a manual or automatic gearbox. The Beat will make its production debut sometime in 2010 and will go on sale in Europe in early 2011. As previously reported, the Beat won't be making the trek to the U.S. until it meets the fed's crash-test standards, so we won't get a shot at the Beat until the next generation arrives – whenever that is.
We've got a bit of a wait ahead of us in the United States, but if this interior photo does indeed show the Chevy Cruze's passenger compartment, then maybe it'll be worth it. TheCaranatic.com doesn't tell the source of the image, the Daewoo logo on the wheel indicates that it was probably snapped in South Korea, where the car will be produced for the European and Asian markets. As for the interior itself? Well, based on the photo it looks top-notch, blending a lot of Opel Insignia with dashes of Chevy Malibu to create a very pleasant driver's environment. This is promising.
We've got a bit of a wait ahead of us in the United States, but if this interior photo does indeed show the Chevy Cruze's passenger compartment, then maybe it'll be worth it. TheCaranatic.com doesn't tell the source of the image, the Daewoo logo on the wheel indicates that it was probably snapped in South Korea, where the car will be produced for the European and Asian markets. As for the interior itself? Well, based on the photo it looks top-notch, blending a lot of Opel Insignia with dashes of Chevy Malibu to create a very pleasant driver's environment. This is promising.
Pending white collar cuts and dismal sales data have resulted in morale problems at General Motors. That's going to put a damper on the Detroit automaker's centennial celebration, so the General plans on showing employees a near-production-ready Chevy Volt to give workers hope. The (hopefully) game-changing extended range electric vehicle will be shown internally around the September 16th centennial, and employees who see the Volt will, of course, have to check their cameras and phones at the door. That doesn't mean the public won't soon get an eyeful of the car, as GM sources report that it'll be shown in production trim at this year's LA or Detroit Auto Show. Don't forget also that it's also been rumored that Volt could show up in Paris in October.
GM has 200 engineers and 50 designers working long hours to make the ER-EV happen by its late 2010 production target, and there are another 400 people working on components. GM is also constructing a new 530,000 sq-ft facility to build the Volt's 1.4L engine and working on getting incentives for the planned construction.
General Motors won't be bringing the Beat to the U.S., but some version of the Groove or Trax will replace the Aveo by 2011. Speaking with Automotive News, Chevy veep Ed Peper said that the bow-tie brand would get something "very similar to one of those vehicles," but in order to meet U.S. crash test standards and accommodate consumer's taste, the new compact five-door would grow in size.
Of the three concepts that debut in New York last year, the Beat will be the first to reach consumers -- in Europe and other markets in 2009 -- and will be built atop GM's global minicar platform in Shanghai. However, the yet-to-be-named Aveo replacement will be underpinned by GM's Gamma small-car platform and will likely be assembled in San Luis Potosi, Mexico.
While GM's decision to bring a more stylish small car to U.S. consumers is certainly good news, we can't help but still feel slighted that the Beat won't be offered in the States and that we'll have to put up with the Aveo for another three years as the only sub-compact offering from the General.
The Insurance Institute for Highway Safety recently performed side crash tests for the first time on small pickups. Their sampling included the Toyota Tacoma, Dodge Dakota, Ford Ranger, Nissan Frontier and Chevy Colorado. The results were published today and they indicate that small pickup owners might want to start wearing helmets while driving.
The IIHS has only three grades for its crash tests: Good, Marginal and Poor. The Dakota, Ranger and Frontier all earned Marginal ratings, while the Colorado could only muster a Poor rating due in part to the moving barrier actually coming in contact with the dummy's head during the simulated crash. The Tacoma, however, was the only vehicle to earn a Good rating. It was also the only small truck tested with side air bags, which are an option for 2008 but will be standard equipment on 2009 Tacomas.
If side airbags are an option, the IIHS will, as a rule, test a vehicle without them unless an automaker wants to rerun the crash test with a model that has side airbags and is willing to pay for the cost of the vehicle that's crashed. Not unsurprisingly, the archaic Ranger was the only small pickup that doesn't offer side airbags at all, though it was surprising that none of the other automakers requested their models be tested with side airbags. The IIHS also tells us that small pickups have the highest driver death rates of any vehicles on the road, which makes these tests all the more significant.
The very first Corvette ZR1 has rolled off the assembly line at General Motors' assembly plant in Bowling Green, Kentucky, and the proud owner of the 638-horsepower hellraiser was there in person to claim his prize. Chevy dealer and Corvette aficionado Dave Ressler won his supercharged Vette at the Barrett Jackson auction back in January for the astronomical sum of $1 million dollars, which equals about 10 times the ZR1's base price of $103,300. Ressler was allowed to sit behind the wheel of his rarified Vette as it completed its assembly run and exited the factory, and let his granddaughter, Ayden Lynn, ride along shotgun. The special ZR1 is set apart from other Blue Devlis with a unique VIN number and a LeMans Blue paint job that will appear on no other car.
After being performance tested, the ZR1 was put in a trailer and carted back to Montana where it will be put in a museum with Ressler's 45 other Vettes, including his #003 1953 Corvette. We know, that's no way to treat a thoroughbred like the ZR1, but at least Ressler's million bucks went to a good cause.
more ...
