Hennessey Performance is apparently excited that the Dodge Challenger is finally here. They now offer a myriad of performance upgrades for the Challenger SRT8 including naturally aspirated versions of Chrysler's 6.1L VEMI V8 that increase power up to 575 horsepower, as well as supercharged and turbo versions producing up to 725 hp. There's clearly a power upgrade for everyone, but the most impressive appears to be the Challenger HPE600 Turbo, also known as the SRT600, which Hennessey reports has ripped off a quarter mile time of 11.9 seconds at 121 mph. The company called the car's launch during the run "conservative", though it was wearing optional Nitto Drag Radial tires at the time. Of course, any big bump in power should be accompanied by equal improvements to the suspension and brakes, and Hennessey will also fit your car with a KW adjustable coil-over suspension, larger anti-roll bars, new bushings and unique StopTech brakes. The cost of a complete Challenger HPE600 Turbo package (including Hennessey embroidered floor mats but not the cost of the donor car, of course) is $74,950, though one can opt for just the engine upgrades and be liberated of only $29,500. In total you could be spending well north of $100,000 on a 725-hp Challenger if you find Hennessey's approach appealing, but look at this way, you'd probably be the only one.
more ...
If you want to sport a Dodge Challenger without the fire-breathing V8 or the hefty price tag, the time to act is now. The first two Dodge Challenger SE models have arrived in Ohio this week, and 500 models are en-route to dealerships in the U.S. and Canada as you read this. The SE Challenger packs Chrysler's ho-hum 3.5L V6 with 250 horsepower and a truly retro four speed automatic, but the news is far from all bad. You still get the Challenger's muscular looks, power flowing through the rear wheels, and a hard to beat entry price of only $21,995. You probably won't win many races, but at least you won't be driving an Avenger. Seriously, though, the Challenger SE charmed us at the 2008 Chicago Auto Show where it debuted with a simple proposition: cheap, rear-wheel-drive fun on four wheels.
Steve Saleen grabbed our attention when he announced his new company SMS Limited and gave us a preview of his upcoming versions of the Dodge Challenger, the 570TM and 570XTM. Since the preview only showed a rendering of the vehicle, we figured it would be quite some time before we saw an actual product. Our expectations were exceeded, however, when SMS sent us news of their very first product: the 296 Supercharger system for the 5.7L and 6.1L HEMI V8. The system features a massive 2955 cc of displacement as well as an internal intercooler, eight-rib pulley, by-pass valve, high-volume heat exchanger and more. The kit can increase horsepower by as much as 45%, all while fitting neatly underneath the stock hood.
Combining a Dodge with a BMW doesn't sound like a good idea. But then again, sound and sight are two different things. So just when we thought we'd seen it all, we're thrown for a surprise.
A Russian illustrator by the name of Remio, evidently quite skilled with the Photoshop and CAD, has managed to blend the new Dodge Challenger with the BMW M1 Homage show car, and the results are rather surprising. While some rendered speculation can prove to be quite close to the mark when the subject goes into production, we'll have to file this one squarely in the "never gonna happen" folder. Shame.
During the recent What's New event at Chrysler's Chelsea Proving Ground, we had the opportunity to sample the new Dodge Challenger SRT-8. For the 2008 model year, Chrysler is only building SRT-8 versions of the Challenger with a combination of the 6.1L HEMI V8 and a five-speed automatic transmission. We first saw the production version of the Challenger earlier this year at the Chicago Auto Show and while we thought the styling was great with perfect muscle car proportions, it is undoubtedly a big car. The Challenger is built on Chrysler's LX platform shared with the 300 and Charger. Compared to the Mustang it looks huge and it hardly seems like it would actually feel sporty.
Fortunately, the dynamic behavior of large cars has made huge strides since the original Challenger went away in the mid-seventies. We first tried out the Challenger on the road at Chelsea before taking it for a hot lap around the evaluation track. The circuit was built back in the early '90s when a certain gentleman named Lutz was still occupying an office on the top floor of Chrysler's headquarters. It's basically a lovely little natural terrain road course, not quite as elaborate as the new road course that Maximum Bob built at the GM Proving Ground, but it's a good way to get a dynamic feel for a car. After lunch we had another opportunity to thrash the Challenger on the autocross course that Chrysler set up on the vehicle dynamics pad. Find out how the Challenger did after the jump, along with some video of our time behind the wheel.
more ...
Like every other automaker under the sun, Mitsubishi is in the process of expanding its reach into Russia. In 2007, the automaker offloaded over 100,000 vehicles in the world's largest country (size, not population) and is looking to sell approximately 140,000 units this year.
Not surprisingly, it's chosen the Moscow Auto Show in August to unveil the next generation Pajero Sport SUV, before sales begin in South-East Asia, South America, Australia and the Middle East later this year.
The new Pajero Sport (or Challenger, depending on the market) is packing all the "active lifestyle" accoutrements you'd expect, including water-repellent seats, 2- or 3-row seating that can accommodate between five and seven passengers, and a waterproof luggage compartment that will come in handy after you've hiked through the volcanoes of Kamchatka.
Power will be provided by either a 2.5- or 3.2-liter common rail diesel, or if oilburners aren't your taste, a 3.5-liter V6 can send power to all four wheels through Mitsubishi's Super Select 4WD system. However, don't expect to see the Pajero in the U.S. or Europe anytime soon.
This weekend, Dodge officially unveiled two Challenger Drag Race Package cars that made their inaugural runs down the 1/4 mile track in front of thousands of race fans at the Mopar Mile-High Nationals near Denver, CO. Based on the standard Challenger SRT8, each of the Drag Race Package cars features a completely stripped body that has the body sealer, sound deadener, and undercoat all removed. Additional components are also left out including the windshield wipers, HVAC system, air bags, rear seats, power steering, exhaust system, side-impact beams, rear bumper beam, and more. Further weight is saved by using composite and poycarbonate components, and overall a total of 1000 pounds has been shaved off the car.
Additional changes include repositioning the engine for a better driveline angle, a slightly shortened wheelbase, a bolt-in crossmember, and solid engine mounts. Engine options include the 6.1L and 5.7L HEMI or the 5.9L Magnum Wedge. Mopar will build at least 100 of the cars to meet NHRA requirement, and they will be eligible to run in Comp, Super Stock, and Stock categories. Pricing will start in the low $30,000 range, and Mopar will begin taking orders in late August or September.
For those of you desperately waiting for the next batch of Dodge Challenger SRT8s to be built after the announcement that the first 6,400 2008 models were already spoken for, fret not, supply is on your side. The Detroit News is reporting that while the majority of limited edition SRT8s were already sold before they were built, about one-quarter of the Challengers were set aside for dealer orders.
Several retailers across the U.S. have between two and twenty Challengers sitting on the lot, with one dealer advertising in Michigan's Macomb Daily that nine Brilliant Black, eight Hemi Orange and two Silver Metallic HEMI-powered coupes are available for the taking. Naturally, supply is dependent on where you live. One dealer in Naples, Florida sold out all eight Challengers in three days, while others have only sold only one out of their allotment. And just because you can find one, doesn't mean it will be selling for sticker. Markups are to be expected, with one dealer charging $45,145 – or about $7,000 – above the SRT8's MSRP.
With a name like Challenger, Dodge's new muscle car had better put down some serious quarter-mile times or else be able to propel itself into outer space. Fortunately, Chrysler's performance parts division Mopar is preparing to do one (if not the other) when it unveils its new Drag Race Package for the Challenger at the annual Mopar Mile-High Nationals at the Bandimere Speedway in Denver next week.
While specific details on the package – which we previewed in our exclusive video last week – remain scarce before the official debut, the Challenger Drag Race Package marks the 70th anniversary of Mopar and forty years since the company's last factory-built drag-race package. Based on the Challenger SRT8, the Drag Race Package features a composite "Body-in-White" direct from the factory and a host of lightweight components, to say nothing of all the parts being deleted for drag-strip use. The engine has been repositioned and the wheelbase actually shortened to optimize weight distribution and driveline angle. Designed in cooperation with the National Hot Rod Association (NHRA) and previewed back in 2006 by the 392 HEMI Dodge Challenger Super Stock concept at SEMA (pictured above), Mopar will build 100 examples of the race-prepped Challenger with three different engine packages available.
Mopar can't let Speedfactory have all the fun supercharging the Dodge Challenger SRT-8, so when the SEMA show rolls around this November, the in-house tuners of all things pentastar will unveil a blown Challenger of their own.
The Mopar-modified SRT-8 will be fitted with all the show-going kit you'd expect at the world's largest aftermarket expo, including a cold-air intake, high-flow cat-back exhaust and a variety of wheel designs and sizes. The details of the blower are still unknown, but with Speedfactory boosting the 6.1-liter HEMI V8 from 425 to 630 hp with its Stage 2 mods, we'd suspect similar figures from the Mopar kit.
