If Drake, the ur-vampire from Blade Trinity, were a car, this is the car he would be. Starting with a CL600, tuning firm Kicherer didn't waste time throwing pieces at the car's already aggressive styling. Instead, Kicherer attacked the CL's jugular: sloppy performance due to the car's portliness. The biturbo V12 gets 53 extra horses to corral 570 in total, torque gets smacked up to 664 lb-ft., the engine gets a new transmission control module to better deal with the extra juice, and out back, the rear axle gets a locking rear differential. The car is lowered an inch, and firmer springs help keep things settled when it's go time. Will all this turn the car into a cheetah? Probably not, but with the carbon goodies added throughout and the 20-inch Kircherer RS-1 wheels, it will look mighty good doing whatever it does.
Every time we see a Flex on the road, it looks cartoonish to us – those two massive rectangles sitting on cute little wheels. We wouldn't be surprised if, a la CARS, a Flex started talking to us. The "ReFlex" above, designed by Sean Smith of SS Designs and being prepared by CGS Motorsports for this year's SEMA Show in Las Vegas, looks like it could have something interesting to say. Who knew that a minimal body kit, a drop, and a set of 22s could give the Flex that personality it's been missing. The custom DuPont-painted CUV is also getting a suede interior, a Kicker sound system, and even new door solenoids from SPAL. We'll take it, or at least a ride in it.
There are six modded Genesis' planned for SEMA: three coupes, three sedans. The coupes have been worked over by Street Concepts, HKS, and Rhys Millen. A rendering of the first tricked-out Genesis sedan from RKSport has rumbled onto the page, and it looks less like competition for the 5 Series than it does a challenger to the Death Star. The Platinum Silver sedan will wear carbon fiber accessories and a couple of spoilers as it hunkers on its oversized TSW wheels. RKSport's take on this car is to raise the performance stakes, and it's going to have Hyundai's help doing it. The whipped cream on the sunday will be a K&N air intake, Magnaflow exhaust, Eibach springs, Baer brakes, and a body kit. The sunday itself consists of performance upgrades that Hyundai is giving to the car's Tau V8 engine. The Korean automaker is hush-hush on those changes, but they're probably good for a bump in the numbers in all the right places. And since you can't drive the cars at SEMA, they'll probably look and sound pretty good, too.
Custom truck lovers, it doesn't matter that the whole world might seem to be against you, you will not be forgotten at this year's SEMA. Performance West will be bringing a hotted up F-150 and F-350, and now Street Scene Equipment rumbles onto the stage with it's own entrant, a juiced up 2009 F-150 Lariat. The SSE job appears to be a little more subdued than the Performance West numbers, but that might just be down to the lack of racing stripes. The Lariat will of course be dropped, because you can't even call it a tuning job if the truck is more than an inch above the ground. After that, the exterior gets new front and rear bumpers and skirts, new mirrors, a bed cap, a tailgate wing, and some of DuPont 's Hot Hues to make it all shiny, among other things. Inside will be the standard rolling theater treatment: headrest video monitors and a "high-end infotainment system" from Audio Innovations. In keeping with the restrained theme, engine mods looks to be limited to an Air Raid intake and a new exhaust. Subtle ain't such a bad thing, though -- we gotta admit we're digging that grille.
Athletic governing bodies are coming down hard on steroids and HGH, which has probably led to a glut on the market. Performance West Group appears to have bought up the entire surplus and injected it into a Ford F-350 dually in order to create the Striker. Part pickup and part Ford Mustang GT500KR, the Striker will be intimidating other vehicles at this year's SEMA show in Las Vegas. The greatest tuning minds of our generation are assisting PWG with the project. Gale Banks is tuning the PowerStroke V8 engine above its 350 hp and 650 lb-ft. Hulst Customs is fabricating the bodywork. American Lightweight will be providing the aluminum 24" wheels. Katzkin Leather and Sony are doing duty inside to make sure you enjoy what will surely be a monster system in beauteous comfort. PWG will then drape the entire thing in Striker Silver and Badass Blue and then probably let it loose to kill things. The rationalist in us wants to ask "What the...?" The auto junkie in us wants to stick it in the driveway and let it reek of testosterone. And then transform into a Decepticon. Which means we can't wait for SEMA.
Weds Sports, a Japanese wheel-maker, has created a full carbon fiber wheel -- rims, spokes, hub, everything -- that weighs 2.76 kg. Coming out to about 6.1 pounds, that's about half the weight of the Dymag carbon fiber wheel with a magnesium rim that you'll find on a Callaway Corvette, and just over a pound more than Dymag's all-carbon race-specific front wheel for a motorcycle. According to a rough translation of Weds' literature, they use a dry carbon fiber process that makes the wheels strong enough for... well, we're not really sure. While the rims look absolutely ace, we can't find any other company that makes an entire wheel out of carbon fiber, and Weds apparently hasn't yet put them in production, which leads us to think that these babies were meant only for the scales at the Tokyo Auto Salon. But if you have $12,000 for a set of four, and you live in an area with no potholes and no curbs, these could be the rims for you.
Has that yellow Lamborghini Gallardo been sitting on the lawn for a while because it's simply not getting you the attention you want? Or have all those other LP560-4 owners made it too hard for you to use the Phone Number Collecting Set? If so, STRUT could have just the right bit of jazz to put the rage back in your bull.
An 11-piece accessory kit in carbon fiber and steel includes grilles for the front, side, and rear intakes, and the engine cover and bumper vents, as well as a STRUT shield for the front of the car. According to STRUT, the accessories give the Lambo "a disctinct, personalized appearance," because pulling up to the party in a Gallardo just wasn't distinctive enough. The price of personalization: $25,000 for the basic set, $35,000 if you gotta be a baller and choose the titanium edition. And no, that doesn't include the STRUT wheels -- those are $9,000 extra.
If you've been in the market for a vintage, or just affordable, Porsche 911 in the last ten years, you've undoubtedly noticed the number of Targa-topped 911s for sale. The reason for the glut of Targas is two fold: Porsche sold a slew of them in the 70s and 80s and they remain less desirable than their fixed-roof counterparts. However, the allure of the Targa hasn't been lost.
Porsche's introduction of the 911 Targa was largely a response to stringent safety regulations in the 1960s, but the appeal of both an open-air experience (without the aesthetic and noise issues of a traditional cloth convertible) and some manner of additional safety made the Targa a popular choice. Porsche reintroduced its modern interpretation of the Targa last year, but instead of the removable roof and fixed rollbar/B-pillar, it opted for a duo of sliding glass panels.
Paso Robles, California-based performance shop, VeloTech, has decided to move beyond its bread and butter business – turbocharging European vehicles – and has developed its own traditional targa setup for current 911s. The roof, which is comprised mainly of carbon fiber, is still a pricey solution for a very select group of enthusiasts, but VeloTech maintains that if the price for the conversion can be reduced from its current cost ($10,000) to something more palatable ($6,000), the market could expand.
The team over at SEMA, you know them as the group that supplies the automotive industry with aftermarket performance and cosmetic accessories, have asked more than 1,000 automotive enthusiasts how they intend to spend their federal tax rebate checks. Of course, we know what SEMA wants the answer to be...
Interestingly enough, most surveyed (21%) said they would use the money to pay down credit cards. Another large chunk (20%) said they'd bank the cash for now. Of those who said they'd spend the money on specialty automotive equipment, most intend to buy wheels, exhaust kits, cold air intakes, and engine performance accessories. From survey results, SEMA was able to determine most enthusiasts have altered, and delayed, buying specialty equipment due to the high cost of fuel. In fact, some of the hottest aftermarket performance parts right now are specifically designed to enhance fuel economy. We think you just found an excuse for that new CAI.
Fiat's neo-500 has been warmly embraced by tuners, and Austria's Oberschider Chip Tuning (O.CT) has turned its focus to the teeny tiny 'talian. The car is purposely designed to evoke the 1960s, so why should the performance numbers be any different? Even with tuning, the horsepower from the 1.3 liter diesel is still under 100, though a bump from 75 to 90 is useful. Even better, torque goes up to 133 lb/ft from 107 in stock tune. It's enough to whack a full three seconds off the 0-60 time, though Corvettes will have covered a quarter mile in the same amount of time. Of course, speed is only part of the equation, and there are wheel upgrades in several colors to punch up the visual ante, too. With all the tuner support popping up for the 500, anticipation for the car's arrival in the U.S. market is beginning to reach Episode 1 levels.
